8930 Telephone Video Surveillance

Dial from your PC via a standard modem to the '8930'. Connect up to 10 cameras to '8930'. Images get transmitted via phone lines to your PC. Image software is provided.
8930 has an Alarm Input, connectable to a PIR motion sensor or similar. In case of alarm 8930 can dial automatically to your PC and transfer images.


P3 8930 - Software screenshoot
Download the P3 8930 Software and test it yourselve!
We have a system set up in Germany with several cameras. The P3 8930 is fully functioning - but limited to 5 Minutes connect time only.
Download here: P3 8390 Demo Software (2.3mb)
Resolution: 1 picture on screen: 512 x 256 pixel 4 picture on screen: 256 x 128 pixel 10 picture on screen: 128 x 80 pixel Resolutions & speed are selectable
Additional functions in CamTel plus version: Pre-alarm picture storage Serial interface for remote controlling
Technical Data: (CamTel plus)
|
Type: Power supply: Environmental data: Size: Video inputs: Video outputs: Impedanz: Resolution: Colors: Compression: Pre-alarm pictures: Transmission speed, ISDN: Transmission speed, analogue: V.24 connection: Alarm input: Relays output: ISDN version: Analogue version: V.24 version: Approvals:
System requirements |
8930 CamTel plus Power adapter, 9VDC (incl.) +5º-+40ºC, not condensing 178 x 42 165mm (W x H x D in mm) 10 BNC connectors: CCIR/PAL, 1VSS 1 BNC connector for monitor 75 Ohm, selectable 512x256, 256x128, 128x80 pixel 16bit, 16.8 mio colors JPEG, selectable in 3 steps about 60 pictures, up to 3 cameras up to 5 frames/s about 1 frame/s for remote control, RS232 for automatic calling to PC 2 relays, max 48V, 0.2A, switchable through software So-interface ED221 (Euro-ISDN) AB-interface, V.24 protocol, tone/puls dial RS232, 2400-230,400baud German BZT, CE .
IBM compatible |
Go back to P3 Home Page
Tel.: +(852) 2423-1812
Fax : +(852) 2423-1899
P3_info@felsweb.com